Fabrication of cu-zr-ti thick film metallic glass structure by double metal mask lift-off process etched glass beer mugs

Concepts in Fabrication of Cu-Zr-Ti thick film metallic glass structure by double metal mask lift-off process Lift-off (microtechnology) Lift-off process in microstructuring technology is a method of creating structures (patterning) of a target material on the surface of a substrate using a sacrificial material. Etched glass window decals It is an additive technique as opposed to more traditional subtracting technique like etching. Glass etching design patterns The scale of the structures can vary from the nanoscale up to the centimeter scale or further, but are typically of a micrometric dimensions.

Amorphous metal An amorphous metal (also known metallic glass or glassy metal) is a solid metallic material, usually an alloy, with a disordered atomic-scale structure.


Etched glass vinyl film Most metals are crystalline in their solid state, which means they have a highly ordered arrangement of atoms. Elegant depression glass etched patterns Amorphous metals are non-crystalline, and thus are glasses. Etched glass sydney But unlike the usual glasses, such as window-glass, which are insulators, amorphous metals have good electrical conductivity.

Metal A metal (from Greek “¿¿¿¿¿¿¿¿” ¿ métallon, “mine, quarry, metal”) is an element, compound, or alloy that is a good conductor of both electricity and heat. Etched glass ornaments christmas Metals are usually malleable and shiny, that is they reflect most of incident light. Glass etching painting designs In a metal, atoms readily lose electrons to form positive ions. Etched glass panels Those ions are surrounded by de-localized electrons, which are responsible for the conductivity.

Wafer (electronics) In electronics, a wafer (also called a slice or substrate) is a thin slice of semiconductor material, such as a silicon crystal, used in the fabrication of integrated circuits and other microdevices. Etched glass edmonton The wafer serves as the substrate for microelectronic devices built in and over the wafer and undergoes many microfabrication process steps such as doping or ion implantation, etching, deposition of various materials, and photolithographic patterning.

Crystal structure In mineralogy and crystallography, crystal structure is a unique arrangement of atoms or molecules in a crystalline liquid or solid. Etched glass mugs A crystal structure is composed of a pattern, a set of atoms arranged in a particular way, and a lattice exhibiting long-range order and symmetry. Etched glass kitchen cabinet doors Patterns are located upon the points of a lattice, which is an array of points repeating periodically in three dimensions.

Outgassing Outgassing (sometimes called offgassing, particularly when in reference to indoor air quality) is the release of a gas that was dissolved, trapped, frozen or absorbed in some material. Etched glass wheat pattern As an example, research has shown how the concentration of carbon dioxide in the Earth’s atmosphere has sometimes been linked to ocean outgassing.

Sputter deposition Sputter deposition is a physical vapor deposition (PVD) method of depositing thin films by sputtering, that is ejecting, material from a “target,” that is source, which then deposits onto a “substrate,” such as a silicon wafer. Etched glass iphone 5 case Resputtering is re-emission of the deposited material during the deposition process by ion or atom bombardment. Etched glass window panels Sputtered atoms ejected from the target have a wide energy distribution, typically up to tens of eV (100,000 K).

Sputtering Sputtering is a process whereby atoms are ejected from a solid target material due to bombardment of the target by energetic particles. Etched in glass route 8 It is commonly used for thin-film deposition, etching and analytical techniques (see below).