Will a c5 transmission fit in a 390, 1965 ford _ _ yahoo answers

In a word, NO. What happens when your torque converter goes out And here’s why. 700r4 torque converter lockup solenoid The C5 is an upgraded C3 transmission. How does torque converter work The C3 is the one that was used in the Pinto and Mustang II cars with automatics. Transmission torque converter symptoms The C5 was designed to replace the C4 which was used in many Ford cars behind 6 cylinder and small blocks with automatic. Transmission torque converter problems So with that said, the C5 was only used in later cars with 6 cylinders and small blocks.


Transmission torque converter calculator Never behind any older FE style engines. Torque converter explained The last FE was in a 1977 Ford pickup. Torque converter lock up test The C5s did not come out until after that. Transtar torque converter And bellhousings WILL NOT interchange between C4 and C5 transmissions. Function of a torque converter One has 5 bolts holding the bellhousing to the front pump housing, and the other has 7. Torque converter shudder Your ’65 Ford car originally had the Cruise-O-Matic transmission. Torque converter clutch solenoid circuit open The only 2 transmissions you can use other than the Cruise-O-Matic are the C6, which is a one piece bodied case or the FMX which has an aluminum bellhousing and a cast iron case. Car torque converter But, they MUST BE from behind an FE engine (360,390, etc) to fit. Blue torque converter And if you switch from the Cruise-O-Matic to either the C6 or an FMX, measure not only overall lengths, but compare transmission crossmember locations and front driveshaft yokes as well. 01192 torque converter lock up Because changing to a different type of transmission in some cases (especially in Fords) can mean relocating transmission crossmembers, and having to have a different driveshaft made, including front yoke. How to rebuild a torque converter Besides, if you could use a C5, you would shell it out with the torque that the old FE engines had.

In a word, NO. 5hp19 torque converter And here’s why. Wiki torque converter The C5 is an upgraded C3 transmission. Test torque converter The C3 is the one that was used in the Pinto and Mustang II cars with automatics. Torque converter clutch solenoid 4l60e The C5 was designed to replace the C4 which was used in many Ford cars behind 6 cylinder and small blocks with automatic. Solenoid torque converter So with that said, the C5 was only used in later cars with 6 cylinders and small blocks. Inside of a torque converter Never behind any older FE style engines. Torque converter diagnosis The last FE was in a 1977 Ford pickup. How much does a torque converter cost The C5s did not come out until after that. Torque converter install And bellhousings WILL NOT interchange between C4 and C5 transmissions. Torque converter cost One has 5 bolts holding the bellhousing to the front pump housing, and the other has 7. Torque converter lock up solenoid symptoms Your ’65 Ford car originally had the Cruise-O-Matic transmission. Torque converter pictures The only 2 transmissions you can use other than the Cruise-O-Matic are the C6, which is a one piece bodied case or the FMX which has an aluminum bellhousing and a cast iron case. Torque converter ratio But, they MUST BE from behind an FE engine (360,390, etc) to fit. Parts of torque converter And if you switch from the Cruise-O-Matic to either the C6 or an FMX, measure not only overall lengths, but compare transmission crossmember locations and front driveshaft yokes as well. Torque converter purpose Because changing to a different type of transmission in some cases (especially in Fords) can mean relocating transmission crossmembers, and having to have a different driveshaft made, including front yoke. Assault torque converter Besides, if you could use a C5, you would shell it out with the torque that the old FE engines had.

In a word, NO. Loose torque converter symptoms And here’s why. Torque converter location The C5 is an upgraded C3 transmission. Transmission specialties torque converter The C3 is the one that was used in the Pinto and Mustang II cars with automatics. Torque converter price to replace The C5 was designed to replace the C4 which was used in many Ford cars behind 6 cylinder and small blocks with automatic. Torque converter lockup control So with that said, the C5 was only used in later cars with 6 cylinders and small blocks. Failing torque converter Never behind any older FE style engines. What does a torque converter do on a go kart The last FE was in a 1977 Ford pickup. Torque converter ballooning The C5s did not come out until after that. Function of stator in torque converter And bellhousings WILL NOT interchange between C4 and C5 transmissions. How a torque converter works One has 5 bolts holding the bellhousing to the front pump housing, and the other has 7. Torque converter causing engine stall Your ’65 Ford car originally had the Cruise-O-Matic transmission. Torque converter seal The only 2 transmissions you can use other than the Cruise-O-Matic are the C6, which is a one piece bodied case or the FMX which has an aluminum bellhousing and a cast iron case. Torque wrench converter But, they MUST BE from behind an FE engine (360,390, etc) to fit. Hydraulic torque converter animation And if you switch from the Cruise-O-Matic to either the C6 or an FMX, measure not only overall lengths, but compare transmission crossmember locations and front driveshaft yokes as well. Torque converter transmission Because changing to a different type of transmission in some cases (especially in Fords) can mean relocating transmission crossmembers, and having to have a different driveshaft made, including front yoke. Torque converter lockup switch 47re Besides, if you could use a C5, you would shell it out with the torque that the old FE engines had.